Stainless Steel Cable Suspension Kits With Spiral Anchors For
This is a kit that Hanging acoustic panels from ceiling,suspension
hardware for acoustic ceiling installations, suspending acoustic
panels - rapid economic solutions...
Hanging systems for acoustic panels require special hardware
Some modular rockwool panels may be supported using spiral anchors
screwed into the panels.
Speedy installation is achieved with adjustable-height support
fittings, hanging wires and
ceiling fixings including expanding anchors for concrete ceilings.
Many of these components are also useful for supporting lighting
other electrical installations and building services.
What does this Suspension Kit ( Acoustic Panels Hanging Kit )
1. 304 Stainless Steel Wire with diecast end;
Cable Size : Ø0.06″ *59″ / (Ø1.5mm*1500mm)
2. Cable Gripper with Hook;
Material : Brass material with Nickel plated
Gripper Size : Ø0.36″ * 2.44″ / (Ø9*52mm)
3.Ceiling Attachment Ceiling;
Material : Brass plated in Nickel
Size : Ø0.7″ * 1.02″ / (Ø18*26MM)
Size:Ø1.18″ * 2″ / (Ø30*51MM)
D:Ø0.06″ - (1.5MM)
L:0.59″ – (1500MM)
Ø0.7″ * 1.02″
Ø0.36″ * 2.04″
Screw ceiling anchor with wire
Two-part screw-on ceiling anchor with drop wire
Thimble size bullet fitting nickel finish
Ideal fixing for ceiling panels and lighting
Ceiling anchors for attaching drop wires to plaster ceilings are
quick to install and supplied at low cost.
Suspended services in buildings such as acoustic panels, light
fittings etc require rapid and
reliable fixing systems combined with support wires. For
lightweight building services
applications 1.5mm wire cable can be relied upon to carry loads in
excess of 10 kg per
suspension point. These slender cables are both economical and
Screw ceiling anchor for conventional ceilings
For plasterboard and similar conventional ceilings which will
accept a plug and screw fixing,
the two-part ceiling anchor is screwed to the ceiling capturing the
supplied 1m or 2m length of wire.
Suspension hooks self locking
Suspension hooks with self locking facility a ideal for rapid
installation and levelling up on site.
Slide the hook up a support wire (1.5mm dia) and it locks fast
wherever it is placed.
To lower simply depress the quick release button as shown on the
image. The clutch
mechanism is released until the suspended item is at exactly the
right height. Excess
wire can then be snipped off.It is much easier to level up acoustic
panels, light fittings
and ceiling hung building services when the adjustment can be
performed at the
suspension point rather than at the ceiling.
The safe Hook has a spring catch across the mouth of the hook to
prevent accidental detachment.
Suspension fitting for rockwool acoustic panels
This is a Spiral corkscrew type panel hanger for acoustic panels -
Ecophon type panels
Economic alternative to Ecophon panel fixings
Spiral anchors provide a convenient suspension point for certain
types of acoustic
ceiling panels made from rockwool which will accept a screw-in
corkscrew type fitment.
Acoustic ceiling installers fitting suspended acoustic panels often
search for lower
cost installation components.
The spiral anchor and our associated fittings have proved a
to the manufacturers' own branded components offering significant
Spiral anchor suspension fittings can be used in conjunction with
our ceiling fixings,
suspension cables and adjustable suspension hooks to create a low